2018+ Stinger Painted Side Reflectors

2018+ Stinger painted side reflectors use a set of factory red reflectors, and we get them painted with factory paint.

Please use these at your own risk since some jurisdictions may not allow you to delete the factory reflectors.

Currently, three colors are available, ready to ship and we will be adding more colors in the near future. Snow white pearl (SWP), aurora black pearl (ABP), panthera metallic (P2M), ceramic silver (C4S), micro blue metallic (M6B), black carbon fiber style, and red carbon fiber style are available. Please choose your color from the menu above.

The painted reflectors are painted with factory paint, and then sprayed with a high quality UV resistant automotive clear coat. For the carbon fiber style option, each piece is hydroprinted and then sprayed with a high quality UV resistant automotive clear coat.

For installation, please take a look at the following.

INSTALLATION INSTRUCTIONS:

1. Open hatch
2. Remove center hatch trim piece. Trim is removed by undoing two plastic fasteners on either side and popping out four retaining pins.
3. Unscrew the four screws that hold down trim pieces on inner fender wells.
4. Pop out four retaining pins that hold down side trim pieces.
5. Remove black trim pieces flanking the tail light assemblies.
6. Unscrew tail light and remove assembly.
6a. *Passenger side only* unscrew radio amplifier to gain access to three screws that attach reflectors to body.
7. Pop off OEM reflector.
8. Install aftermarket insert, and screw into place.
9. Reinstall tail light assembly.
10. Reinstall fender liner.
11. Reinstall center trim piece.

Price may change at any time.

If the total order amount adds up to US$99 or less, there will be a US$25 shipping fee added to orders to be shipped to North America, Asia and Europe. For orders that total US$100 or more, shipping is free to North America, Asia and Europe. For other regions, please email us for a shipping quote.