Intake spacer is 8mm thickness, and we include a non-asbestos gasket that you can use on one side of the intake spacer, and the original rubber ring seals will go on the other side.

Additional..]]> https://sharkracing.com/2011-2016-accent-1-6-piston-and-connecting-rod-set/ Tue, 14 Feb 2017 16:22:38 +0000 https://sharkracing.com/2011-2016-accent-1-6-piston-and-connecting-rod-set/

Piston and connecting rod set that will lower the compression ratio from 11:1 to 9.5:1.

Made specifically for non-turbo 1.6 Gamma GDi engines that are going to be boosted, these pistons and connecting rods are the factory 1.6 TGDi Turbo parts that have been modified to fit the non-turbo ..

Price: US$ 560.00

Piston and connecting rod set that will lower the compression ratio from 11:1 to 9.5:1.

Made specifically for non-turbo 1.6 Gamma GDi engines that are going to be boosted, these pistons and connecting rods are the factory 1.6 TGDi Turbo parts that have been modified to fit the non-turbo ..

Price: US$ 560.00

]]>

Piston and connecting rod set that will lower the compression ratio from 11:1 to 9.5:1.

Made specifically for non-turbo 1.6 Gamma GDi engines that are going to be boosted, these pistons and connecting rods are the factory 1.6 TGDi Turbo parts that have been modified to fit the non-turbo ..]]> https://sharkracing.com/2011-2016-accent-1-6-big-bore-throttle-body/ Wed, 08 Feb 2017 12:53:11 +0000 https://sharkracing.com/2011-2016-accent-1-6-big-bore-throttle-body/

The new 2011-2016 Accent Big Bore Throttle Body is a remanufactured OEM unit. Will only fit the 1.6 non-turbo engine.

We buy a new throttle body from Hyundai, modify it by increasing the bore by 4 mm to 60 mm. The factory unit has a 56 mm bore size.

Modified by a specialty tuner..

Price: US$ 455.00

]]>

The new 2011-2016 Accent Big Bore Throttle Body is a remanufactured OEM unit. Will only fit the 1.6 non-turbo engine.

We buy a new throttle body from Hyundai, modify it by increasing the bore by 4 mm to 60 mm. The factory unit has a 56 mm bore size.

Modified by a specialty tuner..

Price: US$ 455.00

]]> The new 2011-2016 Accent Big Bore Throttle Body is a remanufactured OEM unit. Will only fit the 1.6 non-turbo engine.

We buy a new throttle body from Hyundai, modify it by increasing the bore by 4 mm to 60 mm. The factory unit has a 56 mm bore size.

Modified by a specialty tuner..]]> https://sharkracing.com/superdrift-performance-radiator-cap/ Fri, 27 Jan 2017 16:08:50 +0000 https://sharkracing.com/superdrift-performance-radiator-cap/

SuperDrift Performance Radiator Cap will raise the pressure in the cooling system from 1.1 bar to 1.4 bar, increasing engine efficiency and performance.

Radiator Cap is made in Korea.

Price may change at any time.

If the total order ..

Price: US$ 30.00

]]>

SuperDrift Performance Radiator Cap will raise the pressure in the cooling system from 1.1 bar to 1.4 bar, increasing engine efficiency and performance.

Radiator Cap is made in Korea.

Price may change at any time.

If the total order ..

Price: US$ 30.00

]]> SuperDrift Performance Radiator Cap will raise the pressure in the cooling system from 1.1 bar to 1.4 bar, increasing engine efficiency and performance.

Radiator Cap is made in Korea.

Price may change at any time.

If the total order ..]]> https://sharkracing.com/shark-racing-performance-thermostat-v2/ Thu, 26 Jan 2017 00:05:39 +0000 https://sharkracing.com/shark-racing-performance-thermostat-v2/

Application 

• 2011-2017 Hyundai and Kia cars.

Add power to your car simply by replacing the thermostat.

The SR Performance Thermostat lowers engine operating temperatures, while increasing thermal efficiency and your engine's performance in the process..

Price: US$ 119.00

]]>

Application 

• 2011-2017 Hyundai and Kia cars.

Add power to your car simply by replacing the thermostat.

The SR Performance Thermostat lowers engine operating temperatures, while increasing thermal efficiency and your engine's performance in the process..

Price: US$ 119.00

]]> Application 

• 2011-2017 Hyundai and Kia cars.

Add power to your car simply by replacing the thermostat.

The SR Performance Thermostat lowers engine operating temperatures, while increasing thermal efficiency and your engine's performance in the process..]]> https://sharkracing.com/2011-2016-accent-water-pump-pulley/ Sun, 20 Nov 2016 16:47:37 +0000 https://sharkracing.com/2011-2016-accent-water-pump-pulley/

Lightweight Underdrive Water Pump Pulley for the 2011-2016 Accent.

Pulley weighs about 170 grams, or about 0.37 lb, and is manufactured in Korea using aircraft-grade aluminum.

Image shown is a general image.

Pulley is slightly smaller and much lighter than the stock pull..

Price: US$ 175.00

]]>

Lightweight Underdrive Water Pump Pulley for the 2011-2016 Accent.

Pulley weighs about 170 grams, or about 0.37 lb, and is manufactured in Korea using aircraft-grade aluminum.

Image shown is a general image.

Pulley is slightly smaller and much lighter than the stock pull..

Price: US$ 175.00

]]> Lightweight Underdrive Water Pump Pulley for the 2011-2016 Accent.

Pulley weighs about 170 grams, or about 0.37 lb, and is manufactured in Korea using aircraft-grade aluminum.

Image shown is a general image.

Pulley is slightly smaller and much lighter than the stock pull..]]> https://sharkracing.com/shark-racing-exhaust-cutout-kit/ Wed, 30 Dec 2015 21:56:46 +0000 https://sharkracing.com/shark-racing-exhaust-cutout-kit/

Shark Racing Exhaust Cutout Kit manufactured in Korea by Maintec, with high quality CNC-machined pieces.

Install the cutout between the resonator/middle muffler and the end muffler, or between the resonator and cat for a louder exhaust.

Switch on and open the cutout to get an ag..

Price: US$ 190.00

]]>

Shark Racing Exhaust Cutout Kit manufactured in Korea by Maintec, with high quality CNC-machined pieces.

Install the cutout between the resonator/middle muffler and the end muffler, or between the resonator and cat for a louder exhaust.

Switch on and open the cutout to get an ag..

Price: US$ 190.00

]]> Shark Racing Exhaust Cutout Kit manufactured in Korea by Maintec, with high quality CNC-machined pieces.

Install the cutout between the resonator/middle muffler and the end muffler, or between the resonator and cat for a louder exhaust.

Switch on and open the cutout to get an ag..]]> https://sharkracing.com/shark-racing-high-flow-200-cell-race-cat/ Wed, 30 Dec 2015 21:36:31 +0000 https://sharkracing.com/shark-racing-high-flow-200-cell-race-cat/

Shark Racing High Flow 200 Cell Race Cat manufactured in Korea by Maintec.

Enclosed in a high quality stainless steel case, the cat is significantly less restrictive than the standard ceramic or high density metallic cat.

Inlet and outlet will be 63mm (2.5 inches). Total length ..

Price: US$ 219.00

]]>

Shark Racing High Flow 200 Cell Race Cat manufactured in Korea by Maintec.

Enclosed in a high quality stainless steel case, the cat is significantly less restrictive than the standard ceramic or high density metallic cat.

Inlet and outlet will be 63mm (2.5 inches). Total length ..

Price: US$ 219.00

]]> Shark Racing High Flow 200 Cell Race Cat manufactured in Korea by Maintec.

Enclosed in a high quality stainless steel case, the cat is significantly less restrictive than the standard ceramic or high density metallic cat.

Inlet and outlet will be 63mm (2.5 inches). Total length ..]]> https://sharkracing.com/2011-2014-accent-short-shifter/ Sun, 10 Aug 2014 23:41:40 +0000 https://sharkracing.com/2011-2014-accent-short-shifter/

Short Shifter for the 2011-2016 Accent has been CAD-designed, and CNC machined for a shift height that is about one inch lower than stock, and shift throw that is 30% shorter than stock.

If your original gear knob has a button that you must press to go into reverse gear, installing this..

Price: US$ 250.00

]]>

Short Shifter for the 2011-2016 Accent has been CAD-designed, and CNC machined for a shift height that is about one inch lower than stock, and shift throw that is 30% shorter than stock.

If your original gear knob has a button that you must press to go into reverse gear, installing this..

Price: US$ 250.00

]]> Short Shifter for the 2011-2016 Accent has been CAD-designed, and CNC machined for a shift height that is about one inch lower than stock, and shift throw that is 30% shorter than stock.

If your original gear knob has a button that you must press to go into reverse gear, installing this..]]>